convergence-study

FreedomIntelligence/OpenClaw-Medical-SkillsData Science ToolsAudit pendingSnapshot 5fe73674b663

Summary

This source did not publish a separate summary. Review SKILL.md before using the skill.

SKILL.md

Convergence Study

Goal

Provide script-driven convergence analysis for verifying that numerical solutions converge at the expected rate as the mesh or timestep is refined.

Requirements

Python 3.8+
NumPy (not required; scripts use only math stdlib)

Inputs to Gather

Input	Description	Example
Grid spacings	Sequence of mesh sizes (coarse to fine)	`0.4,0.2,0.1,0.05`
Timestep sizes	Sequence of dt values	`0.04,0.02,0.01`
Solution values	QoI at each refinement level	`1.16,1.04,1.01,1.0025`
Expected order	Formal order of the numerical scheme	`2.0`
Safety factor	GCI safety factor (1.25 default)	`1.25`

Script Outputs (JSON Fields)

Script	Key Outputs
`scripts/h_refinement.py`	`results.observed_orders`, `results.mean_order`, `results.richardson_extrapolated_value`, `results.convergence_assessment`
`scripts/dt_refinement.py`	Same as h_refinement but for temporal convergence
`scripts/richardson_extrapolation.py`	`results.extrapolated_value`, `results.error_estimate`, `results.observed_order`
`scripts/gci_calculator.py`

Do you have 3+ refinement levels?
+-- YES --> Run h_refinement.py or dt_refinement.py
|           +-- Observed order matches expected? --> Solution verified
|           +-- Order too low? --> Check: pre-asymptotic, coding error, insufficient resolution
|           +-- Order too high? --> Check: superconvergence or cancellation effects
+-- NO (only 2 levels) --> Use richardson_extrapolation.py with assumed order
                           (less reliable without order verification)

# Spatial convergence with 4 grid levels
python3 scripts/h_refinement.py --spacings 0.4,0.2,0.1,0.05 --values 1.16,1.04,1.01,1.0025 --expected-order 2.0 --json

# Temporal convergence with 3 timestep levels
python3 scripts/dt_refinement.py --timesteps 0.04,0.02,0.01 --values 2.12,2.03,2.0075 --expected-order 2.0 --json

# Richardson extrapolation with assumed 2nd-order
python3 scripts/richardson_extrapolation.py --spacings 0.02,0.01 --values 1.0032,1.0008 --order 2.0 --json

# GCI for 3-mesh verification
python3 scripts/gci_calculator.py --spacings 0.04,0.02,0.01 --values 1.0128,1.0032,1.0008 --json

Error	Cause	Resolution
`spacings and values must have the same length`	Mismatched input arrays	Provide equal-length lists
`At least 2 refinement levels required`	Too few data points	Add more refinement levels
`Exactly 3 refinement levels required`	GCI needs 3 levels	Provide fine/medium/coarse
`Oscillatory convergence detected`	Non-monotone convergence	Check mesh quality or scheme

Scenario	Meaning	Action
Observed order matches expected	Solution in asymptotic range	Report GCI, extrapolate
Observed order < expected	Pre-asymptotic or coding bug	Refine further or debug
Negative observed order	Solution diverging	Check implementation
GCI asymptotic ratio near 1.0	Grids in asymptotic range	Results are reliable
GCI asymptotic ratio far from 1.0	Not in asymptotic range	Refine further

convergence-study

Summary

SKILL.md

Convergence Study

Goal

Requirements

Inputs to Gather

Script Outputs (JSON Fields)

Workflow

Decision Guidance

CLI Examples

Error Handling

Interpretation Guidance

References

Related skills